Alpha Sonix NDT Solutions Private Limited

Paut Mini Phased Array Ultrasonic Testing Calibration Standard Block Ndt Calibration Block 
Dimensions: LXWXT(10”X1”X1.5”) 250mm X 25mm X 38mm.Description: PAUT-Mini Phased Array Ultrasonic Testing Calibration Standard Block NDT Calibration Blocks.Geometry: Four holes altogether, each measuring 3/64" in diameter, are drilled into the block's 1.000" width an placed.200,.400,.600,.700,.800,.900, 1.100, and.300" from the corresponding scanning surface.Material : Carbon steel,Stainless Steel,Titanium,Aluminum,Alloy Steel.

Dimensions: L X W X T (57mm X 43mm X 12.5mm)
Description: For on-site verification of the miniature shear wave probe index, time basis, beam angle, and gain, a small calibration block measuring 12.5 mm thick is used. includes a 1.5mm hole (or 5mm) with a 12.5mm and 50mm radius, as well as reference mark scales from 35 to 75 degrees that are etched.
Material : Carbon steel Stainless Steel Titanium Aluminum Alloy Steel Cupro Nickel Inconel etc…

Dimensions: L X W X T (75mm X 43mm X 20mm)
Description: For on-site verification of the miniature shear wave probe index, time basis, beam angle, and gain, a 20 mm thick small calibration block is used. includes etched reference mark scales from 35 to 75 degrees, a hole with a radius of 20 and 50 mm, and a 1.5 mm hole (or 5 mm).
Material : Carbon steel Stainless Steel Titanium Aluminum Alloy Steel Cupro Nickel Inconel etc…

Dimensions: L X W X T (305mm X 50mm X 75mm)
Description: IOW Test Block Beam Profile Block Used to assess transducer angles and the beam profile of angle beam transducers.
Material : Carbon steel Stainless Steel Titanium Aluminum Alloy Steel Inconel etc… Geometry: Consists of nine side holes that are 22mm deep and 1.5mm in diameter. according to the specifications of British Standard 2704. 

Dimensions: L X W X T (300mm X 100mm X 25mm)
Description: For both laboratory and field calibration of ultrasonic fault detection equipment. Our version of this block has a radius of 100mm, holes measuring 3.0mm and 50.0mm, reference mark scales that are etched, and two optional slots at the zero point that offer calibrating signals spaced out over a 100mm range. in line with ISO 2400 and EN 12223. The "V1/5 (A2)" Block from BS 2704, which is identical to this block but has a 1.5mm throughhole rather than a 3.0mm hole, should not be confused with it. For more information on this block, visit our test block store.

Geometry: Two optional slots at the zero point that offer calibrating signals at intervals of 100mm range, 100mm radius, 3.0mm and 50.0mm holes, engraved reference mark scales.
Material : Carbon steel Stainless Steel Titanium Aluminum Alloy Steel Cupro Nickel Inconel etc… 

Our Advanced Bendz Scanner, redefines flexibility and precision in non-destructive testing (NDT). This versatile scanner combines advanced technology with robust design to deliver exceptional performance across various inspection applications. 

Our Advanced Orbital Scanner, sets a new standard for pipeline and structural inspections. This state-of-the-art scanner combines durability with precision, making it an indispensable tool for a wide range of industrial applications.